Mumbai Tattoo

Our company is well versed with the advanced techniques and innovative machines of this industry and is indulged in providing a wide spectrum of Tattoo Finalizer Ink. These offered tattoo finalizer ink are formulated using prime grade raw material and ultra modern technology in conformity with international quality guidelines and principles. One coat of this offered tattoo finalizer ink makes tattoo stays longer; it’s a transparent coating which can be used on any design and colour

• Mumbai Tattoo Supply Brings You The Best Quality Products. Please Contact Zaheer 9699735303, Nadeem

Additional Information:

• Delivery Time: 2-3 days

Air Hose
Variety of Hose with different accessories also and available in 2 sizes.

Teach you how to choose airbrush air hose:
1.Confirm the connector size of airbrush gun
2.Confirm the connector size of airbrush compressor
3.How is the weather?Cold or Warm?
4.How long of airbrush air hose need?
 
Most of Aerograph airbrushes is standard 1/8", except for AG-138 airbrush. AG-128 airbrush gun , AG-158 air brush. But the all AEROGRAPH airbrush compressors are stardard 1/8". So AG-24 airbrush hose is the top airbrush air hose for AEROGRAPH series products.

AG-21
Material of AG-21 airbrush air hose: Rubber and Braided Nylon
Outside: Braided Nylon
Dia.: 7.5 x 4.5mm
Length: 1.8m(6ft), 3m(10ft)
Adaptor: G1/8”-G1/4”

AG-23
AG-21 airbrush hose is rubber material,and outside is braided nylon.The one end is stardard 1/4",another is 1/4" x 40. So only AG-158 airbrush gun can connect with this airbrush hose directly.
Length of Airbrush Hose: 1.8m (6ft), 3m (10ft)
Size of Rubber hose: 7.5mm x 4.5mm
Adaptor: One end is G1/4", another end is 1/4"x40
Material: Braided Nylon Rubber

AG-24
Both Connector of airbrush hose: one is 1/8'', another end is 1/8''
Length of AG-24 Airbrush Air Hose: 3m(10ft), 1.8m(6ft)
Braided Nylon Hose: 7.5mm x 4mm
 
AG-33
Material: Rubber
Outside of Rubber hose: Braided Nylon
Dia of Rubber Airbrush hose.: 7.5 x 4.5mm
Length of AG-33 Airbrush Hose: 1.8m(6ft), 3m(10ft)
Adaptor: G1/8"-Quick-release coupler
Airbrush Quick Disconnect Coupler with 1/8' male and female fittings. The quick-release action allows you to quickly change airbrushes when you use multiple airbrush guns.
 
AG-36
Braided Airbrush Air Hose
Material: Rubber
Outside: Braided
Dia.: 7.5 x 4.5mm
Length: 1.8m(6ft),3m(10ft)
Adaptor: G1/8"-Quick-release and air control coupler
Strong point:
Any length be made

Additional Information:

• Delivery Time: 2-3 days

Fancy yet durable and useful accessory. Airbrush Holders are an essential utility for you airbrush. Makes your work easy and convinient.

AG-20

• Holds upto 4 Airbrushes.
• Top holder swivels to help keep airbrushes balanced.
• Clamps to a workbench or table.
• Includes a bracket for mounting an air regulator.
• A must have for every airbrush artist - beginner or professional.

AG-30:

• Holds upto 4 airbrushes.
• Top holder swivels to help keep airbrushes balanced.
• Attach to workbench or table.
• A must - have for every airbrush artist - beginner or professional.

AG-40:

• Includes 6 branches air valves and a 360 rotary pressure gauge.
• Top holder swivels to help keeping airbrushes balanced.
• Holds upto 8 airbrushes.
• Can be connected directely with mini-air compressor.

1 Air Compressor
• 2 Stencil Book
.2 Air gun
☐ 5 Color bottles
• 2 House Pipe
☐ 1 Finalizer

Additional Information:

• Delivery Time: 2-3

MUMBAITATTOO Raven Airbrush (AG-138) - Material: Stainless Steel Color: Silver Application: Advertising, Inks and Photography studios Included Items: Cup, Hose and Nipple Product Dimensions (L x B x H): 15 x 5 x 4 cm Cup capacity: 0.14 Care Instructions: Do not apply pressure on the product from the top. Keep away from corrosive liquids. Features: Lightweight pen gun with a larger cup, Improved stainless steel needle & nozzle, Suitable for the kind of spraying required in precision artistic jobs for free-hand or stencil designing, Adaptable using any colouring agent, Cup design to hold optimum quantity, Effortless trigger action and Hose coupling. Technical Information: Gun distance from work piece mm(inch): 50(2), Fluid nozzle orifice dia.(mm): 0.3, Required pressure(kgs/sq.cm): 1.5, Air consumption of rated pressure lit/min(c.f.m): 5(0.17), Material output(cc/min): 2, Max. pattern width(mm): 20, Min. Air-compressor(HP): 0.25 and Weight of gun with cup(gms) - 90 For more details call Zaheer 9699735303, Nadeem 9029993269.

MUMBAITATTOO Raven Airbrush (AG-138) - Material: Stainless Steel Color: Silver Application: Advertising, Inks and Photography studios Included Items: Cup, Hose and Nipple Product Dimensions (L x B x H): 15 x 5 x 4 cm Cup capacity: 0.14 Care Instructions: Do not apply pressure on the product from the top. Keep away from corrosive liquids. Features: Lightweight pen gun with a larger cup, Improved stainless steel needle & nozzle, Suitable for the kind of spraying required in precision artistic jobs for free-hand or stencil designing, Adaptable using any colouring agent, Cup design to hold optimum quantity, Effortless trigger action and Hose coupling. Technical Information: Gun distance from work piece mm(inch): 50(2), Fluid nozzle orifice dia.(mm): 0.3, Required pressure(kgs/sq.cm): 1.5, Air consumption of rated pressure lit/min(c.f.m): 5(0.17), Material output(cc/min): 2, Max. pattern width(mm): 20, Min. Air-compressor(HP): 0.25 and Weight of gun with cup(gms)

Additional Information:

• Delivery Time: 2-3 DAYS

(0.3MM) NOZZLE (130)

• he Model 136 Set contains 136 Gravity Feed airbrush with permanently mounted 1/16th ounce color cup, protective cap, wrench, instruction manual in a plastic case Medium needle / nozzle
• Excellent for model detailing, fingernail artists, cake decorators, and fine commercial artists who prefer the simplicity of single action; internal mix, gravity feed
• The Model 136 will spray inks, dyes, watercolors, gouaches, properly reduced acrylics, fabric paints, modeling paints, automotive lacquers and enamels, most ceramic stains and glazes, Air-Tex, SpectraTex, Air-Opaque and MODELflex airbrush colors
• Non-slip, one-piece trigger; for beginners and intermediate airbrushers; gravity feed allows for "close-in" spraying; Easy maintenance and cleaning, Self-lubricating PTFE needle bearing enables continuous proper paint flow and prevents needle wear.
• Professional for:Nail Art,T-Shirts,Temporary Tattoos,Cake Decorating,Hobbies,Crafts and More!

Tattoo Goo (Made In USA)
Box Of 24 Tins Each( 0.750 )Rs 7000 our price (Rs 6300 (M-3))
Per Pac Tins Each (0.75oz) Rs 300
Per Pac Tins Each (0.33oz) Rs 200

Additional Information:

• Delivery Time: 2-3

MUMBAI TATTOO PHOENIX SUITE AIRBRUSH (0.2MM, 0.3MM & 0.5MM) NOZZLE DIA (130S)

Mumbai Tattoo Phoenix Suite Air Brushes are high performance air brushes. A high-detail, high-precision, bottom-feed airbrush for artists. This double action bottom feed airbrush is designed for commercial artists, automotive painters, muralists, fine artists etc or any one whose work needs an airbrush, offering quality spray and smooth air flow to produce shape result . The Airbrush 130S airbrush works well with textile colors, acrylics, automotive paints or any type of thinned paints or glaze. This airbrush offers the dot fire preset adjustable handle designed to give a more precise control over material and air flow amounts, this airbrush also comes standard with a dual purpose cutaway and preset handle for easy clean up and a more precise control of air flow. This airbrush unit has a self-centering one size needle and cone-shaped, cut- back fluid tip. The Airbrush 130S airbrush offers a smooth, responsive, long-draw trigger managed by a controllable tension spring system. The body is a tough, plated exterior that is impervious to most solvents. The airbrush design was developed for easy disassembly and assembly for ease of cleaning and repair. The 0.3mm nozzle unit allows the user to spray lines in a variety of thickness which makes it one of the most versatile units in the Zhipp airbrush line. Compatible with most airbrush hoses and quick connects. Box Includes: Dual-Action Trigger Air/Fluid Control 1 x 0.3mm airbrush (130E) 1 x 0.2mm of nozzle, nozzle cap and needle 1 x 0.5mm of nozzle, nozzle cap and needle 1 x airbrush 1 x spanner 1x MUMBAI TATTOO-01 cup (7CC) 1 x MUMBAI TATTOO-401(Quick Coupler) Features: Feed Type:Gravity & Suction Nozzle Dia.: 0.2mm, 0.3mm , 0.5mm Nozzle: 0.3mm, 0.5mm Cup Capacity: 7cc Working Pressure: 15-50 PSI Spray & Color Media: Watercolors Acrylics Inks and Dyes Automotive Urethanes Lacquers and Enamels Cleaning Liquid: Alcohol Thinner Banana oil Acetone .

Additional Information:

• Delivery Time: 2-3 DAYS

Other Details:

• Easy to clean and fully autoclavable
• Screws and back-stems are included
• Grip Material: Aluminum alloy
• Grip Diameter: Approx. 0.8 inch / 2.2cm/ 22mm
• Grip Length: Approx. 2.1 inch / 5.4cm
• Tube Diameter: Approx. 8mm
• Tube Length: Approx. 1.9 inch / 5cm
• Available in various colors.

This hydraulic bed is highly customizable allowing you to raise, lower, and spin the bed a full 360°. The sturdy steel construction offers you a rock-solid, secure base for you to perform all your ink-work This Multi-Purpose Tattoo Bed is the ultimate equipment. This versatile equipment is all you need. Newly designed with Double Support Bracket. This Hydraulic Tattoo Bed is the ultimate equipment is all you need.This hydraulic bed is highly customization allowing you to raise, lower, and spin the bed a full 360.

Other Details:

• Black Color
• Modular Ball-and-Socket Joint Adjustable and Removable Client Armrests
• Fully Adjustable Locking Armrest Design
• Hydraulic mechanism allows for 360 degree rotation
• Backrest so your clients can sit upright for back-work
• This bed equipped with new features
• 18% GST extra
• 3000 rs on delivery 
• delivery time 10 to15 working day.